Electro Voice Speaker System ND6 16 User Manual

ND6-8/ND6-16  
3-Inch High Frequency  
NeodymiumTransducer  
Key Features:  
Extremely high acoustic output  
Geometricallyoptimizedtitaniumdiaphragm  
Very high sensitivity and reliability  
Neodymiummagnetprovidesunprecedented  
output to size ratio  
Compact, ruggedandlightweight  
1.4" exit diameter  
2.0” exit diameter with ADH-6 adapter  
Die-castaluminumheatsink  
General Description:  
Technical Specifications:  
The Electro-Voice ND6 is a world-class high-frequency  
compression driver capable of extremely high acoustic output  
over a wide frequency range.  
ND6-8  
ND6-16  
16 ohms  
14 ohms  
10 ohms  
Nominal Impedance:  
Minimum Impedance: 7 ohms @ 6 kHz  
DC Resistance: 4.5 ohms  
Freq. Response: 1000-20,000 Hz  
8 ohms  
Precise engineering, along with careful selection of materials  
and advanced driver architecture, has resulted in a driver  
that is ideally suited for the most demanding presentation of  
high quality music and communications program.  
Power Capacity1 : 75 Watts, 150 Watts Cont. Prog.  
Recommended Crossover2 : 1000 Hz or higher  
Nominal Efficiency: 28%  
Incorporating Electro-Voice’s exclusive Ring Mode  
Decoupling (RMD) through all design phases has produced  
drivers with unmatched accuracy while minimizing acoustic  
resonances and time domain ringing throughout the driver  
structure.  
Sound Pressure Level3 : 114 dB, HP420 Horn  
(1 Watt @ 1 Meter) 112 dB, HP640 Horn  
110 dB, HP940 Horn  
Throat Diameter: 1.38" (35mm)  
Voice Coil Diameter: 3" (75 mm)  
Voice Coil Wire: Pure Aluminum Ribbon  
The resulting small size and weight-to-power ratio of the ND6  
assures easy installations where weight may be a concern.  
The 2.15 Tesla flux density provided by the Neodymium  
magnet exceeds that of conventional drivers at a fraction of  
the size.  
Diaphragm Construction: 0.05 mm Pure Titanium Dome and  
Surround  
A unique, geometrically optimized 3" titanium diaphragm,  
consisting of a one-piece dome and suspension system gives  
these drivers an ideal combination of superb high-frequency  
response and resistance to fatigue.  
Electrical Connection: Screw Terminals (Accepts a pair of  
12GA Wires  
Polarity: Positive Voltage to Positive Terminal  
Produces a Positive Acoustic  
Pressure  
Integrated into the ND6’s design is a finned aluminum heatsink  
to increase power handling and reliability.  
Flux Density: 2.15 Tesla  
Net Weight (each): 5.5 lbs (2.5 kg)  
Shipping Weight: 6.5 lbs (3.0 kg)  
1 Power capacity per AES standard. Continuous pink noise with a 6 dB crest factor, 2 hours.  
2 For applications below 1000 Hz, use ND6x.  
3 Sound Pressure measured on axis in the far field with 1 Watt input of band-limited pink noise from 1000 - 5000 Hz  
and calculated to 1 Meter equivalent by inverse square law.  
 

Eicon Networks Network Card 64 0074 02 User Manual
Faber Ventilation Hood 280 CFM User Manual
Frigidaire Washer LTF6000ES0 User Manual
Fujitsu Printer FTP 621MCL201 User Manual
Gardena Two Way Radio 1243 User Manual
Gateway Computer Monitor VX750 User Manual
GE Microwave Oven PVM1870DMBB User Manual
Generac Portable Generator 005031 2 User Manual
GE Oven 164D2966P087 User Manual
Global Machinery Company Portable Multimedia Player TVisto User Manual