Gianni Industries Door GL 1200F User Manual

GL-1200F  
Gate Water-Proof Electromagnetic Lock  
Statement  
The Electromagnetic Locks are totally sealed in an epoxy  
filled stainless steel case for water-resistant and vandal-  
resistant purpose. A threaded conduit fitting ensures weather  
resistant protection of the wiring therefore it is ideal for indoor  
and outdoor applications, even in severe weather.  
Wel offers up to 1200 pounds holding force with 12V DC  
power input (24V DC or 12/24V DC dual input voltage  
available by special order), it is the best choice for electronic  
security industry and system integrators.  
Magnet  
Armature  
Magnet  
Armature  
(Power Off)  
(On Power)  
Unique Anti-Residual design  
When there is no power, there will be no holding force, and the push-off button will  
pop out immediately, to release the Electromagnetic Lock and the Armature Plate  
for no residual magnetism.  
Fire Exposure and Hose Stream Tests were conducted in  
accordance with the standard, "Positive Pressure Fire Tests of  
Door Assemblies," ANSI / UL 10B and 10C, uniform building  
code standard UBC 7-2 (1997).  
This series of Waterproof Magnetic Lock is made with epoxy  
potting compound and is protected by this compound. Also,  
GEM Waterproof Series Magnetic Locks have been proved to  
have withstood  
a
water resistance as established in  
accordance with the test procedures of IPX7, IPX8 through a  
trusted third party. Therefore users need not worry that the  
lock will be rusted or sparked, if the lock is using in outdoor  
applications and installing in confined space where any  
inflammable gas.  
Specifications  
Voltage Tolerance: 15%  
Current Draw: 460mA@12Vdc (at temperature 20C)  
(Further notice for diverse input voltage on special order requirement)  
Magnetic bond sensor monitor output (GL-1200F-R)  
(SPDT rated 0.25A@12V DC), remotely monitors the door  
lock or unlock status. (N.C. Output--Door opened; N.O.  
Output--Door closed)  
Operating Temperature: -10~55C )14~131F(  
Humidity: 0~95% non-condensing.  
Lock's surface Temperature (when the power is on):  
<current temperature +20C  
Holding Force: Up to 1200 lbs )545 Kg(  
Dimensions:  
Magnet:(L) 202, (W) 62, (D) 40 mm  
Armature Plate:(L) 185, (W) 62, (D) 16 mm  
Special Finishes for magnet and armature plate: Zinc  
Epoxy Potting Compound: E87252 (S), UL94V-0  
Weight )Approx.(: 4.8 Kg  
Warranty  
The product is warranted against defects in material and  
workmanship while used in normal service for a period of  
5
year from the date of sale to the original customer. The GEM  
policy is one of continual development and improvement;  
therefore GEM reserves the right to change specifications  
without notice.  
GIANNI INDUSTRIES, INC.  
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,  
Tu-Cheng City, Taipei, Taiwan 23678  
The products are manufactured under an ISO  
9001  
&
QC 080000 Certified Quality  
Management Program environment back its  
product quality, performance and commitment  
to customer satisfaction.  
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876  
Website: gianni.tw  
Copyright 2008 Gianni industries, inc. All rights reserved.  
DM-CA-GL-1200F Ver. C Published on 2008.05.12  
 

Dynex Switch DX HUB23 User Manual
Echo Trimmer 99944200595 User Manual
Edimax Technology Network Router EDIMAX FAST ETHERNET MFP SERVER VERSION 20 User Manual
Ericsson Cell Phone T28z User Manual
Extron electronic Switch DTP DVI 230 User Manual
Fisher Price Baby Gym H8268 User Manual
Fisher Price Motorized Toy Car N9522 User Manual
Fostex Musical Instrument FD 8 User Manual
GBC Radio DPR 25+ User Manual
GN Netcom Computer Drive GN8110 User Manual